The Chilli Pro 410HF is a compact wall mounting
unit for controlling HF and DSI ballasts, designed
to provide a professional range of features while
offering Zero 88's standard ease of use, reliability
and affordability. The Chilli Pro 410HF is
exceptionally easy to install. The unit is located by
two screws and secured by a further two.
Removing the front cover is simple and allows for
quick access for installation and maintenance.
The user interface comprises a numeric keypad
and backlit LCD display to make for ease of use
in setting up and using the controller including the
ability to network dimmers together, via ChilliNet.
The Chilli Pro 410HF is shipped in Entertainment
mode. In this mode, the networking features are
disabled to enable the dimmer to be used for
traditional dimming applications. Activation of the
Network mode provides access to networking
features, allowing dimmers to be linked together
or zoned for architectural applications, whilst
retaining the ability to use DMX.
Standard DMX Specifications
Additional Networking Specifications
Number of channels: 4 dimmer + 4 switch
DMX Address: Addressable per channel
Outputs: 4 x 1-10 volt dimmed circuits at 60 mA sink
current per channel/ Or 4 x Tridonic DSI outputs. Plus 4 x
230V 10Amp Relays for power switching of non-dim loads
Total load capacity: 40A (Single Phase)
Dimmer Curves: Normal, Linear, Switched and Square
Memories: 12
Sequences: 3
Topset: Selectable per channel.
Supply voltage: 200-255V (Option for 100-130V)
Operates on single phase
Supply frequency: 45 to 70Hz
Control input: DMX via terminal block accepts DMX 512-
1990. Start address set via front panel controls.DMX
termination may be switched in or out internally.
Mains Channel outlets: Outlet connections via 6mm²
terminal strip.
Case has the following knockouts:
Top 1 x Ø28.5mm, 4 x Ø22.5mm,4 x Ø25.5mm.
Bottom 1 x Ø25.5mm, 1 x Ø22.5mm
Channel protection: 10A, curve C, neutral disconnect,
thermal magnetic circuit breaker per channel, breaking
capacity 6000A.
Cooling: Convection
Dimensions: h=400mm, w=220mm, d=155mm
10 Areas / Zones
1 Master Area / Zone
12 Memories per Area / Zone
3 Assignable Sequences per dimmer
Alarm Input
User selectable DMX interface relationship
DMX on/off
DMX precedence
HTP
